Operation 53
English
Description of each menu
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Wall Color
(Off)
Corrects the projected picture’s color when the projection surface is
not white. See "Using Wall Color" on page 36 for details.
Aspect Ratio
(Auto)
There are four options to set the image's aspect ratio depending on
your input signal source. See "Selecting the aspect ratio" on page 34
for details.
Auto
Keystone
(On)
Corrects any keystoning of the image automatically. See "Correcting
keystone" on page 32 for details.
Keystone
(0)
Corrects any keystoning of the image manually. See "Correcting
keystone" on page 32 for details.
Position
(0)
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower
position of the page change with every key press you made until they
reach their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Phase
(depends on the
selected input
signal)
Adjusts the clock phase to reduce image
distortion.
This function is only available when a PC
signal (analog RGB) is selected.
H. Size
(depending on
the selected
signal)
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Digital Zoom
(1.0X)
Magnifies or reduces the projected image. See "Magnifying and
searching for details" on page 33 for details.
3D Sync
(Off)
Enable 3D function.
3D Sync
Invert
(Disable)
Invert 3D sync.
