Introduction10
C
ontrols and functions
Projector
8. TEMPerature warning light
Lights up red if the projector's
temperature becomes too high.
9
. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
1
0. AUTO
Automatically determines the best picture
timings for the displayed image.
11. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection.
1
2. Right/
Activates panel key lock.
When the On-Screen Display (OSD)
menu is activated, the #6, #11, and #12
keys are used as directional arrows to
select the desired menu items and to make
adjustments.
13. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
1
4. SOURCE
Displays the source selection bar.
1
. Focus ring
Adjusts the focus of the projected image.
2
. Zoom ring
Adjusts the size of the image.
3. POWER indicator light
Lights up or flashes when the projector is
under operation.
4
. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
5
. POWER
Toggles the projector between standby
mode and on.
6
. Left/
Starts the FAQ function.
7
. BLANK
Used to hide the screen picture.
11
10
12
14
13
9
8
11
5
6
3
4
7
1
2
