Operation 17
Digital Keystone Correction
Keystoning refers to the situation
where the projected image is
noticeably wider at either the top or
bottom. To correct this, press 3
Left/ Right 4 (hot key) on the con-
trol panel of the projector or KEY-
STONE 3/4 on the remote
control, and then adjust the sliding
bar labeled Keystone, as needed.
Press + to correct keystoning at the
top of the image. Press - to correct
keystoning at the bottom of the
image.
Source Selection
To sequentially select the input sources,
press SOURCE on the control panel of the
projector or the remote control.
