Combination Upholstery/Dusting Brush Tool:
Two types of cleaning tools are included in one
attachment: rotate for desired tool.
■ Use Brush side to dust furniture, blinds, books,
lamps, shelves.
■ Use Upholstery side for curtains, draperies,
cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachments for a longer reach.
NOTE: When using the Hose for above floor
cleaning, make sure the Powerfoot does not
tilt forward.
When you are done using your BISSELL PowerForce, return
it to the Upright position and store the Power Cord.
Turn vacuum cleaner OFF.
Unplug Power Cord by grasping the polarized plug (NOT
the cord) and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of
vacuum cleaner.
Clip molded plug to Power Cord to secure.
To maintain maximum performance from your BISSELL
PowerForce, perform these simple maintenance checks.
Select BISSELL PowerForce models are equipped with a Bag
Change Indicator. This indicator monitors the airflow through the
Dust Bag and turns red to indicate a reduction or blockage. The
following conditions may cause it to become completely red.
Dust Bag is full; change the bag.
Dust Bag is clogged with fine materials; change the bag.
Clog in the vacuum; clear the clog.
Special Tools Continued
7
1.
2.
Routine Maintenance
Power Cord
3.
4.
Bag Change Indicator
1.
2.
3.
Tip:
Your BISSELL
PowerForce features
a Quick Release
™
Cord Wrap. To
remove the Power
Cord quickly and
easily, rotate the
Upper Cord Wrap
towards floor, and
slip Power Cord from
Upper and Lower
Cord Wraps.
WARNING:
To reduce the risk of electric
shock, turn Power Switch OFF
and disconnect polarized plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
Tip:
Vacuuming new carpet or fine
powders may clog the Dust Bag,
causing the Bag Change Indicator to
turn red even though the Dust Bag
does not appear to be full. Change
the Dust Bag to restore maximum
performance.
Bag Change
Indicator
