![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/b/39/b3918ea7-e91f-463c-9054-b09de2c70fb3/b3918ea7-e91f-463c-9054-b09de2c70fb3-bge.png)
57
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Note:
● When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the Scan or Travelstore func-
tion.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮ Press the MENU button 9.
“TUNER MENU” appears in the display.
➮ Press the OK button : to display
the tuner menu.
➮ Press the or button 7 repeat-
edly until “SENS” appears in the
display.
The display shows the currently set sen-
sitivity level. “SENS HI3” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
➮ Set the sensitivity level that you
want using the
buttons 7.
When you have finished making your
changes,
➮ press the MENU button 9.
Note:
● You can set different sensitivity lev-
els for FM and MW or LW (AM).
Storing stations
Storing stations manually
➮ Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW).
➮ Tune into the station that you want.
➮ Press and hold down one of the
station buttons 1 - 3 6 or 4 - 6 ;
for longer than two seconds to as-
sign the station to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
● Any stations that were previously
stored in this memory bank are de-
leted in the process.
➮ Press and hold down the BND•TS
button 4 for longer than two sec-
onds.
The storing procedure begins. “TRAV-
EL STORE” appears in the display. Af-
ter the process has completed, the ra-
dio will play the station that is stored in
memory location 1 of the FMT memory
bank.
Listening to stored stations
➮ Select the memory bank or wave-
band.
➮ Press the station button 1 - 3 6 or
4 - 6 ; that the station you want
to listen to is assigned to.
RADIO MODE