63
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Note:
● If the device was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button 1 in order to
start playing the CD.
● If a CD is already inserted in the
drive,
➮ press the SRC button @ repeated-
ly until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
Selecting tracks
➮ Press one of the arrow buttons 7
to select the next or previous track.
If you press the
or button 7 once,
the player will play the current track
again from the beginning.
Fast track selection
To quickly select tracks backwards or
forwards,
➮ press and hold down one of the /
buttons 7 until fast-reverse /
fast-forward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
➮ press and hold down one of the
buttons 7 until fast searching
backwards / forwards begins.
Random track play (MIX)
➮ Press the 4 MIX button ;.
“MIX CD ON” appears briefly in the dis-
play and the MIX symbol lights up. The
next randomly selected track will then
be played.
Cancelling MIX
➮ Press the 4 MIX button ; again.
“MIX CD OFF” appears briefly in the
display and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
➮ Press and hold down the OK but-
ton : for longer than two sec-
onds.
The next track will then be scanned.
Note:
● You can set the scanning time. For
further information, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Cancelling SCAN and continuing
listening to a track
➮ To stop scanning, press the OK
button :.
The currently scanned track will then
continue to be played normally.
CD MODE
