40
Scanning receivable stations
(SCAN)
You can briefly listen in to all receivable
stations. The scanning time can be set
in the menu at between 5 and 30 sec-
onds.
Starting SCAN
➮ Hold down the OK button ; for
more than two seconds.
The scanning process begins. “SCAN”
appears briefly on the display, followed
by the current station name or frequen-
cy, which flashes.
Ending SCAN, continuing to listen
to a station
➮ Press the OK button ;.
The scanning process is completed, the
station last scanned remains active.
Setting the scanning time
➮ Press the MENU button 8.
➮ Press the button : repeatedly
until “SCANTIME” appears on the
display.
➮ Use the buttons : to set the
desired scanning time.
➮ Once the setting has been com-
pleted, press the MENU button 8
or OK ;.
Note:
The set scantime also applies to scan-
ning in cassette mode but not to scan-
ning in CD changer mode.
Programm-Typ (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme they are
currently broadcasting. This information
can be received and displayed by your
car radio.
For example, the programme types can
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
You can use the PTY function to select
stations of a particular programme type.
PTY-EON
Once the programme type has been
selected and the search started, the unit
switches from the current station to one
of the selected programme type.
Note:
● If no station corresponding to the
selected programme type is found,
a beep sounds and “NO PTY” ap-
pears briefly on the display. The
unit then tunes in automatically to
the station last received.
● If the set station or a different sta-
tion in the broadcasting network
should broadcast the desired pro-
gramme type at a later time, the
unit will automatically switch from
the current station, or from cassette
or CD changer mode, to the station
broadcasting the desired pro-
gramme type.
RADIO MODE
