37
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Adjusting seek tuning sensitivity
It is possible to adjust the sensitivity of
the seek tuning function to tune the ra-
dio into stations with strong reception
signals only, or to those with weaker
reception signals as well.
➮ Press MENU 8.
➮ Press : repeatedly until
“SENS” appears in the display.
➮ Press :.
The currently selected setting will ap-
pear in the display. “SENS HI6” indicates
the highest level of sensitivity, “SENS
LO1” the lowest. If you select “SENS
LO”, “lo” will light up in the display.
➮ Press : to select the desired
sensitivity.
➮ Once you have made your selec-
tion, press MENU 8 or OK ;.
Storing radio stations
Storing radio stations manually
➮ Select the desired memory bank
FM1, FM2, FMT or either MW or
LW.
➮ Tune the radio into the desired sta-
tion.
➮ Press and hold down one of the
station preset buttons 1 to 6 > on
which you want to store the radio
station for longer than two seconds.
Storing radio stations
automatically (TravelStore)
You can automatically store the six ra-
dio stations with the strongest reception
in your current reception area (for FM
only). These stations will be stored in
the FMT memory bank.
Note:
Any stations stored previously in the
memory bank will be deleted.
➮ Press and hold down BND / TS 5
for longer than two seconds.
The storing process will begin.
“TRAVEL-STORE” will appear in the
display. After the stations have been
stored, the radio will automatically be-
gin to play the station stored on preset
button 1 for the FMT memory bank.
Recalling stored radio stations
➮ Select the desired station memory
bank.
➮ Press the station button 1 to 6 >
on which you have stored the de-
sired radio station.
RADIO OPERATION
