79
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Making adjustments
➮ Press and hold down the AUDIO
button : for longer than two sec-
onds.
➮ Press the softkey 5 assigned to
the “USER” display item.
➮ Press the softkey 5 assigned to
the display item of the equalizer
(“EQ-1”, “EQ-2” or “EQ-3”) whose
settings you want to change.
➮ Press the softkey 5 assigned to
the display item of the equalizer
band (“LOW1”, “LOW2”, “HIGH1”,
“HIGH2” or “HIGH3”) whose set-
ting you want to change.
The top line displays the frequency in
Hz, the level in dB and the quality fac-
tor “Q”.
To select the frequency,
➮ repeatedly press the joystick 8 to
the left or right until the frequency
flashes.
➮ Adjust the frequency that you
want to change by pressing the
joystick 8 up or down.
To adjust the level,
➮ repeatedly press the joystick 8 to
the left or right until the level dis-
played in front of “dB” flashes.
➮ Adjust the level for the frequency
by pressing the joystick 8 up or
down.
To adjust the quality factor,
➮ repeatedly press the joystick 8 to
the left or right until the quality fac-
tor displayed after “Q” flashes.
➮ Adjust the quality factor by press-
ing the joystick 8 up or down.
Note:
● Proceed in the same way with all
the frequencies that you want to
adjust.
➮ Press the joystick OK 8 or the
AUDIO button : to close the
menu.
The settings are saved.
EQUALIZER
2.Bronx_MP75_gb 16.08.2005, 14:22 Uhr79
