45
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
The track that is currently being sam-
pled will continue to be played.
Note:
● The duration of the samples can be
adjusted. Refer to the section on
“Adjusting the Sample Time” in the
“Radio Operation” section.
● There must be a pause of at least
three seconds between each of the
tracks on the cassette in order to
use the S-CPS, RPT and SCAN
functions.
Changing the Display
In order to change between the display
of tape direction, tape counter, elapsed
play time, remaining play time or clock
time:
➮ hold down the / DIS button, 7,
one or more times for longer than
two seconds, until the display you
want appears.
Resetting the Tape Counter
In order to reset the tape counter,
➮ press button, 5 MIX, >.
Fast Winding
Fast forward
➮ Press the button, :.
“FORWARD” appears in the display.
Fast rewind
➮ Press the button, :.
“REWIND” appears in the display.
Stopping the fast wind
➮ Press the OK button, ;.
Play continues.
Note:
● While the tape is being fast wound,
it is possible to hear the radio sta-
tion that was most recently tuned
in. This requires the “Radio moni-
tor” function to be switched on.
Pausing During Play
➮ In order to interrupt the playing of a
tape, press button 3
, >.
Play is interrupted, and “CAS PAUSE”
appears on the display.
➮ Press button 3 , >, again to
continue after the pause.
Switching the Radio Monitor On
and Off
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “RM ON”
or “RM OFF” to appear in the dis-
play.
➮ Press the or button, :, in or-
der to switch the radio monitor on
or off.
➮ Press the MENU button, 8, or
OK, ;.
CASSETTE OPERATION
