120
Read new messages
• Press
/ to select “Input” and press
OK.
If there is more than one message, press
/ to select the message you want to read
and press OK.
Press / to move through the message
line by line forwards or backwards. Press
<< / >> to move to the left or right in the mes-
sage.
After you have finished reading
• Press CL.
“CLEAR MESSAGE ?” will appear in the dis-
play.
Select “Yes” to delete the message, select
“No” to save the message in “Storage”.
Calling the sender or another telephone
If you would like to call whoever sent the
message,
• press
while the message is on dis-
play.
The telephone will automatically call the
corresponding number. If the message con-
tains a telephone number in “quotation
marks”, the call will be made to that number.
If there are several different telephone num-
bers in quotation marks, the call will be made
to the first one.
Sending SMS messages
• Press
/ to select “Output” and
press OK.
For a completely new message, select
“New”. Under “Patterns” you can select pre-
pared texts. With “Edit” you can alter one of
the messages saved in Storage.
• Press
/ to select the desired func-
tion and press OK.
Now you can begin to enter your message.
If necessary, read the information in the
section on “How to enter a name/text”.
• Press OK once you have completed
your message.
“Number:” will appear in the display.
• Enter the recipient’s number and press
OK.
• Press
/ to select “Send”, “Store” or
“Both” and press OK.
The transmission report will appear briefly
in the display.
Read/clear stored messages
• Press
/ to select “Storage” and
press OK.
If there are several different messages,
press
/ to select the message you want
and press OK.
When you have finished reading,
• press CL.
“CLEAR MESSAGE ?” will appear in the dis-
play.
Select “Yes” to delete the message, select
“No” to save the message in the “Storage”.
Broadcast
Cell Broadcast is a short message service
which is transmitted in numbered “chan-
nels”.
The channels send different special mes-
sages.
Contact your service provider for more de-
tailed information and a list of the available
channels.
When Broadcast is set to “On”, you must
enter the number of the channel from which
you are expecting information after press-
ing OK.
Programming with DSC – Call Menu
Helsinki gb2 12.06.2002, 10:49 Uhr120
