Clock Time
Displaying the time
You can display the time in the tuner, SD,
USB and CD changer mode.
Press the button DIS ; repeatedly un-
til the time appears.
Setting the time
To set the time,
press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "CLOCK SET" appears on the dis-
play.
Press the
button 2 to open the sub-
menu.
The currently set time appears on the dis-
play. The hours fl ash and can be adjusted.
Adjust the hours with the
or but-
ton 2.
Once the hours are set,
press the
button 2.
The minutes fl ash.
Adjust the minutes with the
or but-
ton 2.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
u
u
u
u
u
u
u
u
u
Selecting 12/24-hour clock
mode
Press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "24 H MODE" or "12 H MODE" ap-
pears on the display.
Press the
button 2 to call up the
submenu.
Press the
button 2 to switch be-
tween the modes.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
Displaying the time with device
and ignition switched off
To display the time when the device is off
and the vehicle ignition is on,
press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "CLOCK OFF" or "CLOCK ON" ap-
pears on the display.
Press the
button 2 to call up the
submenu.
Press the
button 2 to switch the
display between ON and OFF.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
u
u
u
u
u
u
u
u
u
u
u
u
64
Clock Time
02_Brisb_VictoriaSD48_gb.indd 6402_Brisb_VictoriaSD48_gb.indd 64 23.11.2007 16:13:39 Uhr23.11.2007 16:13:39 Uhr
