A SERVICE OF

logo

Open as PDF
next previous
Reinstalling the Cargo Cover Panels
To reinstall a cargo panel do the following.
1. You can either leave the strap system attached
to the side of the cargo area while it is not in
use, or you can store it inside the top box
storage compartment. See Top-Box Storage
on page 2-86 for more information.
2. Starting with cargo panel 1, place the latches in
the unlocked position. Place cargo panel 1 on
the cargo area rails while holding the back of
the cargo panel up.
Push the panel forward until it is snug against
the Midgate
®
and then let the back of the
panel down being sure that the pegs align with
the receivers.
Left Side Shown, Right Side Similar
2-77