Using an Externally Mounted Flash (Sold Separately)
171
Attach the flash to the conversion
lens adapter.
● When attaching the Macro Ring Lite MR-
14EX, press and hold the release buttons
on both sides of the Macro Ring Lite and
fit it onto the conversion lens adapter.
● When attaching the Macro Twin Lite MT-
24EX, attach the flash heads to their
respective flash head mounts ( ). Press
and hold the release button on the top of
the external ring and fit it onto the
conversion lens adapter ( ).
Set the camera to e mode.
● Press the q button to choose e.
XThe shooting mode will switch between e
and with each press.
Set [ND Filter] to [On].
● Press the m button and use the op
buttons to choose , then press the qr
buttons or use the
Â
dial to choose .
Configure the externally mounted
flash.
● Make settings as shown on Steps 4 – 5 on
p. 167.
