Using AF to Focus (AF Method)
138
You can also tap on the LCD monitor screen to select the face or
subject. If the subject is not a face, <z> will be displayed.
If no faces can be detected, or if you tap on the LCD monitor but do
not select any face or subject, the camera will switch to [FlexiZone -
Multi] with automatic selection (p.138).
3
Focus on the subject.
Press the shutter button halfway to
focus.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn orange.
4
Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.132).
You can use up to 49 AF points for wide-area focusing (automatic
selection). This wide area can also be divided into 9 zones for focusing
(zone selection).
1
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
FlexiZone - Multi:
o
Area frame
