![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/6/f9/6f9e36ea-0156-4469-966d-03ffdc65f4e3/6f9e36ea-0156-4469-966d-03ffdc65f4e3-bga8.png)
168
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
2 Attachthelteradapter.
Align the
○
markonthelteradapterwith
the
●
mark on the camera, and then turn
the adapter in the direction of the arrows
until it locks in place.
To remove the adapter, turn off the
camera, hold down the ring release
button, and turn the adapter in the
opposite direction.
3 Attachalter.
Attachtheltertothecamerainthe
direction of the arrow.
•WerecommendtheuseofgenuineCanonlters(58mmdia.).
•When not using auto focus to shoot, set the manual focus option
[Safety MF] to [On].
•Ifyouusethebuilt-inashwiththelteradapterattached,portions
of the image may appear darker.
•Whenusingthelteradapter,besuretouseonlyonelteratatime.
Attachingmultiplelters,oraccessoriessuchasaheavylens,may
cause the attachments to fall off and become damaged.
•Donotgripthelteradaptertightly.
•Removethelteradapterwhennotusingalter.
• Thelteradapterandalenshoodcannotbeattachedtothecameraatthe
same time.
Still Images
Using a Remote Switch (Sold Separately)
An optional Remote Switch RS-60E3 can be used to avoid camera shake
that may otherwise occur when pressing the shutter button directly. This
optional accessory is convenient when shooting at slow shutter speeds.
1 Connect the remote switch.
Make sure the camera is off.
Open the terminal cover and insert the
remote switch plug.
2 Shoot.
To shoot, press the release button on the
remote switch.
•Bulb photography (long exposures) is not supported.