A SERVICE OF

logo

Open as PDF
next previous
83
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, and
C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Still Images
Moving and Resizing AF Frames (1-point)
When you want to change the position or size of the AF frame, set the AF
frame mode to [1-point].
1 Move the AF frame.
Touch the screen. An AF frame is
displayed in orange where you touched
(Touch AF).
You can turn the <7> dial to move the AF
frame and press the <o><p><q><r>
buttonstone-tunetheposition.
To return the AF frame to the original
position in the center, press the <n>
button.
2 Resize the AF frame.
To reduce the AF frame size, turn the
<y> ring. Turn it again to restore it to the
original size.
3 Finish the setup process.
Press the <m> button.
•AF frames are displayed at normal size when you use the digital
zoom (=
36) or digital tele-converter (=
82), and in manual
focus mode (=
80).
• You can also link the Spot AE Point frame to the AF frame (=
72).
• YoucanalsoconguretheAFframesizebypressingthe<n> button and
choosing [AF Frame Size] on the [4] tab.
• On the screen in step 1, you can also restore the AF frame to the original
position by touching [
], or exit the setting by touching [ ].
Still Images Movies
Face AiAF
• Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
• After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
• When the camera detects movement, frames will follow moving subjects,
within a certain range.
• After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
•If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
•If faces are not detected when Servo AF (=
84) is set to [On], the
AF frame is displayed in the center of the screen when you press
the shutter button halfway.
•Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Facesinprole,atanangle,orpartlyhidden
•The camera may misinterpret non-human subjects as faces.
•No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.