207
When you set the power switch to <k>, the [Z1/Z2] tab will show
functions dedicated to movie shooting. The menu options are as
follows.
[Z1] menu [Z2] menu
AF method
The AF methods are the same as described on pages 164-170. You
can select [u+Tracking], [FlexiZone - Multi], or [FlexiZone -
Single]. For movie shooting, [Quick mode] cannot be used.
Movie Servo AF
During movie shooting, the camera focuses the subject
continuously. The default setting is [Enable].
When [Enable] is set:
• Even if you do not press the shutter button halfway, the camera will
continue focusing the subject.
• Since the lens is always operating, it will consume battery power
and the movie shooting time (p.194) will be shorter.
• Depending on the lens, the focusing noise may be recorded. To
reduce the recording of the lens operation noise, use a
commercially-available external microphone. With EF-S18-135mm
f/3.5-5.6 IS STM lens, the lens operation noise will be minimal.
• During Movie Servo AF, turn off the camera’s power before you set
the lens’ focus mode switch to <MF>.
3 Menu Function Settings
