![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/b/3c/b3c6d863-70da-4d5b-a689-05bc9b2bd8e0/b3c6d863-70da-4d5b-a689-05bc9b2bd8e0-bg29.png)
41
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Easily Composing Shots after Manual Zooming
(Framing Assist – Lock)
Still Images
Movies
You can reduce camera shake at the telephoto end, which makes it easier
to compose shots.
1
Compensate camera shake at the
telephoto end.
● Press and hold the [ ] button. [ ] is
displayed, and image stabilization optimal
for shooting at the telephoto end is
applied.
2
Shoot.
● While holding the [ ] button, press the
shutter button halfway to focus on the
subject, and then press it all the way
down.
● The zoom factor cannot be adjusted by pressing the [ ] button
(
=
40) while you are holding down the [ ] button.
● Recomposing the shot while holding down the [
] button may
make image stabilization less effective. In this case, [
] is
displayed in gray. If this occurs, release the [
] button, compose
the shot, and then press it again.
● If you start recording a movie while holding down the [
] button,
image stabilization may cause the shot to be recomposed.
2
Reacquire the subject.
● Aim the camera so that the subject enters
the white frame, and then release the
[ ] button.
● The previous magnication is now
restored, so that the area within the white
frame lls the screen again.
● Some shooting information is not displayed while the camera is
zoomed out.
● During movie shooting, the white frame is not displayed if you
press the [
] button. Also note that a changed zoom factor and
camera operating sounds are recorded.
● If you prefer to shoot at the zoom factor of the screen in step 1,
press the shutter button all the way down.
● You can adjust the zoom factor that the camera reverts to when
you release the [
] button by moving the zoom lever to resize
the white frame while you hold the [
] button.
● To adjust the area displayed when the [
] button is pressed,
access MENU (
=
30) ► [ ] tab ► [ Display Area], and
choose one of the three options.
● The zoom factor cannot be changed with the [
] button after
you press the shutter button all the way down in self-timer mode
(
=
44).