A SERVICE OF

logo

14
Chapter 1 Introduction to the CR-180II
Rear View
Air VentConnectors
Power Cord Connector
Connect the power cord provided with
the scanner to this connector.
To avoid overheating and causing a fire, never block the air vents on the back of the
scanner.
Connectors
DIP switch
This switch is for setting the
SCSI ID. (See “Setting the
SCSI ID,” on p.24.)
SCSI connector
Connect a half-pitch 50 pin
SCSI cable. (See “SCSI
Connections,” on p.24.)
USB connector
Connect a Hi-Speed USB 2.0
compatible cable. (See “USB
Connections,” on p.23.)
CAUTION