Using an Externally Mounted Flash (Sold Separately)
172
Configure the externally mounted
flash.
● You can shoot in E-TTL automatic flash
exposure compensation mode just by
setting the camera’s shooting mode to G,
B, or M.
● Set the aperture values in B or D, then
shoot.
• Be sure the cords from the Off Camera Shoe Cord, Macro Ring Lite or
Macro Twin Lite do not obstruct or interfere with the flash.
• While shooting with a tripod, adjust the direction of the camera so that
the flash heads do not contact the tripod or bracket.
• Depending on the placement of the controller, it may come into contact
with the LCD monitor.
• Use the screen for shooting. The viewfinder cannot be used.
• 8 mode is not available.
