A SERVICE OF

logo

9. The Add Plotter - Ports screen opens.
Make
sure that Plot to a port is selected, select the port that you want to use for the plotter, then click the
Nextbutton.
Note
In
the Add Plotter - Ports screen, it is recommended to select Network Port. If you select Local
Port, the AutoCAD warning message may appear when printing.
10. The Add Plotter - Plotter Name screen opens. Click the Nextbutton.
Note
You
can change the Plotter Name setting here, but you will normally leave it as it is and go to Step
11.
Windows Software
>
HDI Driver
>
Installing with the Add-A-Plotter Wizard iPF825
4
372
Downloaded from ManualsPrinter.com Manuals