3-7
Changing the Current Standard Settings
Setting/Storing Specifications of the Copy Function
3
Setting the Standard Frame Erase Width
You can set the standard frame erase width for Frame Erase function.
NOTE
• The default setting is <02 mm>.
1
Enter the Additional Functions menu and open the <2.COPY SETTINGS> menu.
For details about the procedure above, see steps 1 and 2 in “Setting the Standard Exposure,” on p. 3-3.
2
Press or to select <4.FRAME ERASE WIDTH>, and press .
When you press , the <FRAME ERASE WIDTH> menu appears.
3
Press or to set the desired frame erase width, and press .
You can also enter the standard frame erase width using the numeric buttons.
When you press
, the standard frame erase width is stored and the display returns to the <COPY
SETTINGS> menu.
NOTE
• You can set the frame erase width in the range from 01 mm to 20 mm.
4
Press (Stop) to return to the standby mode.
COPY SETTINGS
4.FRAME ERASE WIDTH
FRAME ERASE WIDTH
02mm
