Additional Copy Functions
2
2-27
Making Copies with Margins (Margin)
● If you select [Left Margin] or [Right Margin]:
Use [–] or [+] to set the margin for the front and back (0 mm to 20 mm). Then, press [OK]
➔
[Done]
in this order.
The specified mode is set, and the display returns to the Basic Features screen.
● If you select [Top Margin] or [Bottom Margin]:
Use [–] or [+] to set the margin (1 mm to 20 mm). Then, press [OK]
➔
[Done] in this order.
When entering values in millimetres, you can use - (numeric keys) and .
If you enter the value with - (numeric keys), you can change the entered value by pressing
[–] or [+].
The specified mode is set, and the display returns to the Basic Features screen.
If you enter a value outside the setting range, a message prompting you to enter the appropriate
value appears on the screen.
