Using the Printer with a Network
67
Printer Driver Functions (Macintosh)
Using the Printer with a Network
The printer can be used with an Ethernet network environment. Follow the steps described
below to connect the printer to the network.
■ Before Setting up the Printer
Install the printer driver on each network computer that will use the printer.
For information on installation, refer to the Quick Start Guide.
■ Printer Setup
To use the printer on a network, first set up the print server, then set up each client
machine.
• Print server setup procedure
1 Select Chooser in the Apple Menu.
2 Select Active in AppleTalk.
3 Select the S200SP icon, then select the printer name in Connected to:.
S200.book Page 67 Saturday, September 22, 2001 2:20 PM
