Changing the Color and Shooting
91
Specify the target color.
● Position the center frame so it is filled with
the color you want and press the r button.
The specified color will be recorded.
Specify the range of colors to be
swapped.
● Press the op buttons to adjust the range
of colors affected.
● Select a negative value to limit the range
of colors. Select a positive value to extend
the range of colors to similar colors.
● Pressing the l button accepts the
setting and restores the shooting screen.
• Using the flash may cause unexpected results in this mode.
• The recorded color and range of colors will be saved even if you turn off
the power.
• Under some conditions, the image may appear coarse.
