You can check whether the image is in focus right after it is recorded.
eThe recorded image displays for about 2 seconds (or the
interval set with the Review function p. 24).
Press O (or @)while ,.e Recorded Image
image is displayed. /__
The number of times the DISP but- ,__
ton is pressed depends upon the ,_
display settings for the LCD monitor
(See below). Press the DISP. button ___
repeatedly until the screen at the ..........
right appears. Orange frame contents
eDisplays as follows.
- Camera is focused: the AF frames are displayed in the
recorded image in white and the frame that is in focus has
an orange frame within it.
- Camera is not focused: an orange frame appears at the
centre of the recorded image.
- Contents of the orange frame can be confirmed at the bot-
tom right. You can change the display magnification of the
area within the orange frame with the zoom lever.
eYou can switch between orange frames and change the dis-
play position (p. 75)using the MENU button or the FUNCJ
SET button.
To Cancel Checking the Focus
Press the shutter button halfway.
• You can delete an image by pressing the ,_ button while
the image is displayed, except in the display position
change mode (See Basic Guide, p. 19).
• Pressing the DISP. button will change the display on the
LCD monitor as follows.
Focus Confirmation -) Detailed ._ No Information
74
