4
CEILING HARDWARE
CROSSBAR
MOUNTING
BRACKET
WIRE NUT (4)
GETTING STARTED
Installing a New Ceiling Fixture Outlet Box
Ifyoudonothaveanexistingxturelocatedwhereyou
wishtoplaceyourCasablancafan,anapprovedceiling
xtureoutletboxmustbeinstalledandwired.
Using Existing Ceiling Fixture Outlet Box
AfterturningthepowerOFFatitssource(eithercircuit
breakerorfusebox),lowertheoldxtureanddiscon-
nectthewiring.Checktheceilingxtureoutletboxtobe
surethatitismarked‘Approvedforceilingfanmount-
ing’.Ifitisnot,anewboxmustbeinstalled.
Warning: Toreducetheriskofre,electricalshock,or
personalinjury,mounttooutletboxmarkedacceptable
for ceilingfan supportusing the mountinghardware
providedwiththeoutletbox.
FLAT WASHER (2)
LAG SCREW AND WASHER
(1)
1″ x 8-32 ROUND
HEAD SCREWS (2)
CAUTION: To reduce the risk of personal
injury, use only the mounting hardware
provided with the approved outlet box to
install the crossbar mounting bracket.
CROSSBAR MOUNTING BRACKET INSTALLATION
Proceed with installation as follows:
Step 1. Place the wires from the ceiling outlet box
to oneside ofthe crossbar mountingbracket.Attach
thebracket,withgroundwireandridgesdown,tothe
ceiling xture outlet box with the mounting hardware
includedwiththeoutletbox.Tightenthescrewsrmly
byhandonly,beingcarefulnottobendthebracketby
overtightening.
JOIST
CEILING FIXTURE
OUTLET BOX
(CEILING FAN
RATED)
CROSSBAR
MOUNTING
BRACKET
(RIDGE SIDE
DOWN)
1” X 8-32
ROUND-HEAD
SCREWS (2)
WASHERS
(2)
CEILING
WIRING
GREEN
GROUND
WIRE
LAG SCREW
AND
WASHER (1)