A SERVICE OF

logo

13
Holliston
DC

Blade InStallatIon



(not to scale)


  Remove the ve shipping blocks, and
screws as shown in Figure #2. DO NOT discard the
ten (10) screws; you will need them for installing the
blades onto the fan.

  Attach a blade to a blade iron by rst
pressing the blade iron onto the blade, then attaching
the blade iron using three blade screws and blade
washers as shown in Figure #3. Using the provided
screwdriver, tighten securely by hand only. Repeat
for each blade assembly.

  Before attempting to attach the blades,
review Figure #4 for blade placement on the motor.
The numbers and lines show screw placement when
attaching the ve blade irons and blades assemblies
to the fan.







Figure #2






Figure #3
Figure #4