9
Step 12. Remove the wire nuts on the BLACK and WHITE
wires from the fan. If necessary remove the insulation
from the last
1
/
2
” of each wire (fan and light fixture).
Step 14. Attach the switch housing wires to the light
fixture wires by placing the bare ends of the wires to-
gether and then securing with a wire nut. Connect in
this order:
Step 13. Have an assistant hold up the light fixture
until it is close to the adaptor ring.
• WHITE wire from fan to WHITE wire from
light fixture. Secure with wire nut.
• BLACK wire from fan to BLACK wire from
light fixture. Secure with wire nut.
Inspect each wire nut and ensure that no bare wire is
visible; pull on each wire to test the connection is
mechanically sound.
LIGHT FIXTURE INSTALLATION
LIGHT FIXTURE ELECTRICAL CONNECTIONS
