E-46
Message Description Required Action
Invalid File Name You specified an invalid file
name.
Make sure that you are
specifying the file name
correctly.
Invalid Folder Name You specified an invalid folder
name.
Make sure that you are
specifying the folder name
correctly.
Too Many Files Selected The number of files you
selected exceeds the allowable
limit.
Reduce the number of
selected files.
k Screen Receiver
Message Description Required Action
A connection could not be
established.
Either the calculator is not
connected or the connected
calculator is not in the OHP
Mode.
Correct the problem and try
again.
For details, select the following
on the menu bar: Help -
Manual - Manager PLUS, or
refer to the Manager PLUS
user’s guide.
You started a data
communication operation while
the USB cable was not
connected.
Check for proper connection of
the calculator to the computer
and confirm that the calculator
is in the OHP mode. Then try
again.
See “10. Using Screen
Receiver to Display the
Calculator Screen Image on
Your Computer” for details.
A problem occurred during
communication.
Disconnect the USB cable,
check the setup of the
calculator, and try again.
For details, select the following
on the menu bar: Help -
Manual - Manager PLUS, or
refer to the Manager PLUS
user’s guide.
Some problem occurred during
data communication.
Disconnect the USB cable and
check the setup of the
calculation. Then try again.
See “10. Using Screen
Receiver to Display the
Calculator Screen Image on
Your Computer” for details.
Multiple calculators have been
detected.
To start communication, make
sure there is a USB connection
with a single calculator.
Multiple calculators are
connected to the computer.
Make sure that there is only
one USB connection to a single
calculator
before starting
communication.
See “10. Using Screen
Receiver to Display the
Calculator Screen Image on
Your Computer” for details.
