Page 11
SKU 93167
For technical questions, please call 1-800-444-3353
5. With assistance, place the Hitch Coupler (58) over the vehicle’s hitch ball, pull the trigger,
push down on the Handle, and release the Trigger, making sure it locks in the slot. Pull
up and down on the Coupler to make sure the hitch ball is fitting snugly in the Coupler.
There should be no play between the hitch ball and Coupler. If there is play, tighten the
Adjustment Nut until no play is present. If the Adjustment Nut is too tight, the Handle
will not lock. WARNING! If the Hitch Coupler is not secured properly, the ball could
come loose while the Trencher is in motion, possibly causing property damage or
SERIOUS PERSONAL INJURY.
6. Make sure to attach each side of the Safety Chain (56) equally to the towing vehicle’s
rear bumper or frame.
7. CAUTION! Care must be taken when backing up the Trencher. Only back up the
Trencher on a straight path. If the Trencher is allowed to turn off the straight path while
backing up, the Trencher could jackknife, cauing severe damage to the Trencher and to
the towing vehicle.
SAFETY PIN
“R” PIN
HITCH BALL
(NOT INCLUDED)
HAN-
TRIGGER
ADJUSTMENT
NUT
SAFETY
CHAIN
(63)
HITCH COU-
PLER (58)
Safety Chain (56)
HANDLE
REV 07f
