A SERVICE OF

logo

Open as PDF
next previous
Headlamps
Before replacing a headlamp that does not light, check
to make sure that the wiring connector is securely
fastened to it.
See “Replacement Bulbs” in the Index to check the size
and type
of
headlamp you need to
use
before you begin
to
replace the headlamp. You must replace a headlamp
with
one
that is exactly the same.
Be careful not to move the aiming screws when you
replace the headlamp.
If
the headlamp being replaced
was properly aimed, the new one will be also if it
is
properly installed.
1.
Remove the Tom@ head screws at the end
of
the
aiming ring.
6-43