Power Seats
If your vehicle has power seats, the controls are located
on the outboard side of the seats.
• Raise or lower the front of the seat cushion by
raising or lowering the front of the horizontal control.
• Raise or lower the rear of the seat cushion by
raising or lowering the rear of the horizontal control.
• Raise or lower the entire seat cushion by raising or
lowering the whole horizontal control.
• Move the seat forward or rearward by moving the
horizontal control forward or rearward.
If your vehicle has power reclining seatbacks, the
control is located rear of the power seat control on the
outboard side of the seats. Adjust the angle of the
seatback by pressing the vertical control forward
or rearward. See Reclining Seatbacks on page 1-5.
If your vehicle has manual reclining seatbacks,
see Reclining Seatbacks on page 1-5.
Power Lumbar
Your vehicle’s seats may be equipped with power
lumbar. They will either be 2-way or 4-way.
If your vehicle has 2-way
lumbar adjustment, it will
have this control located
on the outboard side of
the front seat(s).
To increase support, press and hold the front of the
control. To decrease support, press and hold the rear
of the control. Let go of the control when the lower
seatback reaches the desired level of support.
2-way Power Lumbar
1-3
