A SERVICE OF

logo

Open as PDF
next previous
To inspect or replace the engine air cleaner/filter:
1. Open the hood. See Hood Release on page 6‑13.
6.2 L V8 Engine LS3 shown, 6.2 L V8 Engine LS9 and
7.0 L V8 Engine LS7 similar
A. Tube
B. Clamp
C. Duct
2. Remove the tube (A) from the air cleaner
assembly.
3. Loosen the clamp (B) at the throttle body and
remove the duct (C).
6.2 L V8 Engine LS3 shown, 6.2 L V8 Engine LS9 and
7.0 L V8 Engine LS7 similar
A. Mass Air Flow Sensor Connector
B. Connector Lock
4. Remove the connector lock (B) located at the
bottom of the mass air flow sensor connector (A).
5. Press on the top and bottom of the mass air flow
sensor connector (A) and remove.
6-28