A SERVICE OF

logo

Open as PDF
next previous
3.
4.
Pull the bulb
straight out
of
the
socket.
Put a new bulb
into the socket
and push it in
until it is tight.
5.
Put the socket back into the side marker assembly and turn it to the
right to tighten it.
6.
Replace the parkinghrn signal lamp assembly and tighten the screws.
Roof
Marker Lamps
1.
Remove the screws and lift off the lens.
2.
Pull the bulb straight out of the socket.
3.
Put a new bulb into the socket and push it in until
it
is tight.
4.
Replace the lens and tighten the screws.
6-51