A SERVICE OF

logo

Open as PDF
next previous
Front Parlcrrurn Signal Lamps (Composite and
Sealed Beam)
1. Remove the two screws at the inside edge
of
the parking/turn signal
lamp assembly.
2.
Remove
+he
lamp awmbly.
3.
Squeeze the tab
on the side
of
the
lamp socket while
turning
the socket
counterclockwise.
4.
Pull the socket out of the lamp assembly.
5.
Pull the bulb from the socket.
6.
Gently push the new bulb into the socket.
7.
ht the socket back into the lamp assembly
and
turn it clockwise until it
locks.
8.
Put the parking/turn signal lamp assembly back into the vehicle and
tighten the screws.
6-37