A SERVICE OF

logo

Open as PDF
next previous
Service Manual SL236 Motor Replacement
7
12. Reinstall projector cradle to SL236 lift. (See Figure 12)
• Use two nylon spacers (K), two flat washers
(D) and two locknuts (G) for rear lift arms.
• Use two steel spacers (F), two nylon spacers
(K), two flat washers (D) and two locknuts (G)
for front lift arms.
13. Reinstall the projector into the SL236 following instructions
included with the SL236.
14. Re-route projector power and signal cables following
instructions in the SL236 installation instructions.
15. Restore power to SL236.
Figure 12
(F) x 2
(K) x 2
(D) x 2
(G) x 2
(G) x 2
(D) x 2
(K) x 2