Submenu
99
Absorb After ^PN
• Disable. All line terminators that immediately follow the ^PN command
are sent to the printer and processed.
• Enable. All line terminators that immediately follow the ^PN command are
ignored.
IGP 110 Compatbl.
This option instructs the IGP/VGL to behave similar to the IGP-110 with
respect to certain commands. All new users with new applications should
select the “Disable” option. Selecting this mode insures the printer will behave
as described in this manual.
• Disable. The IGP/VGL does not emulate the IGP-110 mode.
• Enable. The IGP/VGL emulates the IGP-110 version.
Error Handling
Following are several options which define how errors are reported.
Error msgs
• Enable. Command syntax is checked and error messages printed when
command parameters are incorrect.
• Disable. Error checking and error messages are suppressed.
Error markers
• Enable. Prints the following error markers for those elements that print
beyond the page boundaries:
>> for elements that begin off the right side of the page;
<< for elements that begin at the indicated position but end off the page;
♦ for elements where the starting position of the command contains an
error other than an off-page error.
Offpage Errors
• Disable. Does not report errors for elements that start or end beyond the
right edge of the page.
• Enable. Reports errors for elements that start or end beyond the right
edge of the page.
Barcode Errors
• Enable. An error message will print when invalid bar code data is
encountered.
• Disable. IGP/VGL will not print an error for illegal bar code data; the bar
code will be skipped.
