4
ENGLISH
Subwoofer connections (DSW-391)
Connect this input to the pre-out connector for the subwoofer on the
amplifi er’s SUBWOOFER PRE OUT using the included audio cable.
SUBWOOFER
PRE OUT
Amplifi er
Included audio cable
(RCA pin-plug cord)
NOTE
• Do not plug the power cord into an AC power outlet until all
connections have been completed.
• Note that clamping pin-plug cords and power cords together or
running pin-plug cords near the power transformer could result in
humming or noise.
Auto standby function
This subwoofer is automatically set to the standby mode if no signal
is input for 5 to 15 minutes, to save electricity.
The power turns on immediately when a signal is input.
Connecting the power cord
Wait until all connections have been completed before connecting
the power cord.
For North American model only
To household
power outlet
(AC 120 V, 60 Hz)
Power cord
For European model only
To household
power outlet
(AC 230 V, 50 Hz)
Power cord
For Austrarian model only
To household
power outlet
(AC 230 V, 50 Hz)
Power cord
NOTE
Insert the AC plug securely. Incomplete connections could cause
noise.
Playback
POWER
LEVEL
Using the subwoofer
1
Set POWER to the “ON” position.
2
Adjust the volume using LEVEL.
