![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/0/81/0811b2ff-90de-426d-a1e3-7eb995a395c9/0811b2ff-90de-426d-a1e3-7eb995a395c9-bg2f.png)
ENGLISH
Getting Started
Connections Remote Control Information Troubleshooting
SpecificationsMulti-ZoneSettings
Playing Components
Turning Off the Sound Temporarily (Muting)
Press .
The sound is reduced to the level set at menu “Mute Level” (vpage
31).
To cancel, press again. Muting can also be canceled by adjusting
the master volume.
•
•
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Unplug headphones when performing Audyssey™ Auto Setup or
other settings.
•
•
Switching the front speakers
Press .
NOTE
When you set to “Custom” with “Front Speaker Setup“ (vpage 29),
you cannot operate .
Operations During Playback
Front
Selecting the Surround Mode
Select a surround mode to enjoy surround playback with your favorite sound field effects.
1
Playing the source (vpage 40).
2
Press to select the surround
mode.
n Multichannel sources
The surround modes that can be selected
differ according to the input source.
n 2channel sources
When you select “DOLBY PLgz”, set “Amp
Assign” to “Front Height”.
DOLBY PLgx,
DOLBY PLg
or
DOLBY PLgz
: The signals are decoded in DOLBY PLgx,
DOLBY PLg or DOLBY PLgz, for playback.
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
z
: DOLBY PLgx can be selected when surround back speakers are
being used.
Operations
The selectable surround modes depend on the following:
• Format of the audio signals being input
• Number of channels of the audio signals being input
• The set amplifier assignment mode (vpage 27)
3
Select the mode for the source at “Mode” (
vpage
46).
n DOLBY PLgx, DOLBY PLg
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
Pro Logic
: This is the Pro Logic playback mode. This can be
selected when playing with a DOLBY PLg decoder.
When this mode is selected, “DOLBY PL” is
displayed.
n DTS NEO:6
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
※ The modes that can be selected depend on the input source
being played.
The “Cinema” and “Music” modes can also be set by pressing
or .
This is the operation for playing 2-channel sources.
Rear
z
See overleaf
Playback
q Playing Sources According to the Sources’ Audio Signal Format/Number of
Channels (Standard Playback)