![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/e/3c/e3c107a8-7e1e-4cca-a16f-11ed7a7c79b2/e3c107a8-7e1e-4cca-a16f-11ed7a7c79b2-bgd1.png)
o
Desired sound does not come out
Symptom Cause / Solution Page
The volume does not
increase.
0
The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. 147
0
Appropriate volume correction processing is performed according to the input audio format and settings,
so the volume may not reach the upper limit.
-
No sound comes out with
the HDMI connection.
0
Check the connection of the HDMI connectors.
37
0
When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To output
from the TV, set “TV”.
155
0
When using the HDMI control function, check that the audio output is set to the AV amplifier on the TV. 124
No sound comes out of a
specific speaker.
0
Check that speaker cables are properly connected.
28
0
Check that a selection other than “None” is set for the “Speaker Config.” setting in menu. 179
0
Check the “Assign Mode” setting in the menu. 178
0
When the sound mode is “Stereo” and “Virtual”, audio is only output from the front speakers and
subwoofer.
-
No sound is produced from
subwoofer.
0
Check the subwoofer connections.
29
0
Turn on the subwoofer’s power. -
0
Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”. -
0
When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and the
sound mode, no sound may be output from the subwoofer.
179
0
When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the
subwoofer.
184
0
You can make the subwoofer always output sound by setting the “Subwoofer Mode” to “LFE+Main”. 184
DTS sound is not output.
0
Check that the digital audio output setting on the connected device is set to “DTS”. -
0
Set “Decode Mode” on the menu to “Auto” or “DTS”.
167
Dolby TrueHD, DTS-HD,
Dolby Digital Plus audio is
not output.
0
Make HDMI connections. 42
0
Check the digital audio output setting on the connected device. On some devices, “PCM” is set by
default.
-
Contents Connections Playback Settings Tips Appendix
209
Front panel Display Rear panel Remote Index