A SERVICE OF

logo

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
448
Format
clear counters {ports <portlist>}
Parameters
ports - (Optional) Specify a range of ports to be configured. The port list is specified by listing the
lowest switch number and the beginning port number on that switch, separated by a colon.
Then highest switch number, and the highest port number of the range (also separeted by a
colon) are specified. The beginning and end of the port list range are seperated by a dash.
<portlist> - Enter a list of ports used for the configuration here.
If no parameter is specified, system will display counters of all the ports .
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To clear the Switch’s statistics counters:
DES-3200-28/ME:admin#clear counters ports 7-9
Command: clear counters ports 7-9
Success.
DES-3200-28/ME:admin#