A SERVICE OF

logo

7. Start the engine in the vehicle that has the booster
battery. Let the engine idle a few minutes. Then, start the
engine in the vehicle with the discharged battery.
NOTE: Refer to ЉSynchronizing ESPЉ under ЉElectronic
Stability ProgramЉ in Section 5 if the ESP/BAS light (in
the instrument cluster) remains on continuously after
starting the engine of the vehicle with the discharged
battery.
8. When removing the jumper cables, reverse the above
sequence exactly. Be careful of the moving belts and fan.
WARNING!
You should not try to start your vehicle by pushing
or towing.
Do not connect the cable to the negative post of the
discharged battery. The resulting electrical spark
could cause the battery to explode.
(Continued)
Jump-Starting
WHAT TO DO IN EMERGENCIES 357
6