A SERVICE OF

logo

GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
21
STARTING WARM ENGINE
1. Press the decompression device (E).
2. Stop Switch
Move stop switch (A) forward away from the STOP position.
3. Purge Bulb
Pump purge bulb (C) until fuel is visible in the "Clear" fuel return
line.
4. Recoil Starter
Lay the unit on a at area and keep movable attachment parts clear
of all obstacles. Hold unit rmly and rapidly pull the recoil starter
handle (D) until the engine res.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
STOPPING ENGINE
1. Release throttle trigger and allow to run at an idle speed.
2. Slide ignition switch to “STOP” position.
E
A
D
C
D