www.elitescreens.co
/ eliteinfo
elitescreens.com
1.
12V Trigger
:
12V trigger for your new Elite Home2
-----allows your screen to synchronize its drop and rise
with the projectors power cycle. The screen drops when
the projector powers up and retracts when the projector
powers down.
Connection
ins
inside
of
case
To Pro
ector
Video Pro
ection Interface
Red DC12V
Green
0V
2. IR (Infrared) Wall Box Kit and E
e Receiver: The Wall Box Kit contains an IR receiver and enables the
consumer to use either the IR remote or hard wire controls to operate the screens drop/rise capabilities. The IR eye
protrudes from the bottom of the casing to present a low profile line-of-sight control option for your IR remote. It is a low-
visibility alternative to using the wall box kit and its ability to protrude from the bottom of the screen, allows line-of-sight
control even in a recessed ceiling installation.
Connection
ins
inside
of
case
Connection
ins
inside
of
case
Senso
Wall-
mounted
Receiver
(Extension
Sensor)
Transmitte
Sensor
3. Bubble Level: Included with the installation package is a small bubble level that can be useful in
determining if the screen is perfectly level when installing.
NOTE: ① Please use the Down sign side as the bottom.
Bubble
The Bubble should be in the middle position to determine that it is level.
