A SERVICE OF

logo

Plugging in the Printer
1.
Make sure that the power switch is turned off. It is off when
the 0 side of the switch is pressed down.
2.
Check the label on the back of the printer to make sure the
voltage required by the printer matches that of your
electrical outlet. Also, make sure that you have the correct
power cable for your power source.
cl
Caution:
If is
not
possible
to
alljust
the
prinferfor
iise
af
another
voltage.
If
the
rated uolfage and your
ouflef
voltage do not
match,
coufacf
your
dealerfor
assistance. Do not plug
in
the
3.
If the power cord is not attached to the printer, connect it to
the AC inlet on the back of the printer.
4.
Plug the power cord into a properly grounded electrical
outlet.
Setting Up
Your
Printer
1-7