4. Turn on the printer by pressing the
P power button.
5. Turn on your Macintosh.
See the next page for instructions on installing the printer
software. You must install the printer software before using
your printer.
Using an optional EPSON interface card
An optional LocalTalk or Ethernet interface card lets you use
your printer on an AppleTalk network.
To use the LocalTalk Interface Card (C82312
), you will need
two LocalTalk Locking Connector Kits (DIN-8 version). Attach
a connector box to the AppleTalk interface on the printer and to
the printer port on the Macintosh. Then attach the LocalTalk
cable between the two connector boxes. See the user’s guide
that comes with the connector kits for more details.
To use the Type B Ethernet Interface Card (C82357
), see the
user’s guide that comes with the card for setup information.
For information on installing these interface cards in the
printer, see Chapter 7, “Using Optional Interfaces.”
Note:
The asterisk in the product number is a substitute for the last digit,
which varies by country.
Macintosh
2
R
Easter10 Ref. Guide
Rev.C
A5 size Chapter 2
1-07-98 DR, pass 3
Getting Started
2-27
