EPSON Stylus Pro GS6000 User’s Guide
The Control Panel
19
Details of Menu mode
PRINTER SETUP
Item Parameter Explanation
SIDE MARGIN 5mm to 25mm
(0.20inch to 1.00inch)
You can set the margin for left and right side.
PAPER SIZE CHECK ON You can select whether to check the paper width.
❏ ON:
Check the paper width and top edge of the paper.
❏ OFF:
Do not check the paper width and top edge of the
paper. The printer continues to print even if the
paper width does not match the data width, and
the printer may print beyond the paper. Because
this soils the inside of the printer, we recommend
you select ON. This may result in a wider blank margin
at the top of each page.
OFF
PAPER SKEW CHECK ON When you select ON, if the paper is not straight, PAPER
SKEW appears on the LCD panel and the printer stops
printing. When you select OFF, a paper align error does
not occur even if the printed data is out of range of the
paper, and the printer continues to print.
OFF
PRINT NOZZLE PATTERN OFF When you select ON, the printer prints the nozzle check
pattern before printing each print job or the 10th sheet,
depending on the setting you have set.
ON: EVERY PAGE
ON: EVERY 10 PAGES
HEATING TIME OFF You can set the length of time to preheat the heaters.
When more than the set time has passed after turning
on the printer or after printing is finished, each heater
turns off.
10min to 240min
FLUSH ONTO PAPER YES You can set up the flushing operation while printing.
❏ YES:
Performs the flushing operation on the page
margins. The printing speed improves since the
number of times to return to the flushing box is
decreased.
❏ NO:
Performs the flushing operation to return to the
flushing box every time the print head goes and
returns.
NO
FLUSHING FREQUENCY 5PASS You can set the frequency that the print head returns to
the flushing box when setting YES in the FLUSH ONTO
PAPER setting. (When you select 5PASS, the print head
returns to the flushing box every time the print head
goes and returns five times.)
1PASS to 999PASS
PAPER ORIGIN SETUP 0mm to 800mm You can set the beginning of printing (origin) of the
horizontal direction.
