Basic Printing
1-3
3. Make sure the Mode option is set to
Automatic. This lets
the printer software determine the best settings for your
print job and is the easiest way to get good printing results
on all types of paper.
4. Choose the
Media Type
you want to print on from the
following list (click the arrow button to scroll through the
list). If you are not sure which setting to select, refer to the
table on page 3-2.
◗ Plain paper
◗ 360 dpi Ink Jet Paper
◗ Photo Quality Ink Jet Paper
◗ Photo Paper
◗ Photo Quality Glossy Film
◗ Ink Jet Transparencies
◗ Ink Jet Back Light Film
Your media choice may restrict the available range of
settings such as print quality and resolution.
5. For the Ink setting, choose
Color
or
Black
.
6. Set the slider in the Mode box to
Quality
or
Speed
. This
lets you choose between the highest resolution or the fastest
printing for the media you’re using. (The slider is not
available when certain media types are selected.)
7. If necessary, click the
Paper tab and choose your paper size,
number and order of copies, orientation, and printable
area. See page 2-12 for detailed instructions.
8. If you’re using Windows 95 or Windows NT 4.0, click the
Layout tab and check the proportional printing, page
layout (Windows 95 only), and watermark options to make
sure they’re correct for your print job. See page 2-22 for
details.
9. Click
OK when you’re finished checking your settings.
Note:
If you select Ink Jet Back
Light Film, the Flip
Horizontal option is
automatically turned on.
See page 2-4 for details.
If you’re printing grayscale
images, choose Black for
faster output or choose
Color for higher quality.
